Hobbie Info‎ > ‎Electronics‎ > ‎FPGA‎ > ‎Boards‎ > ‎

Scarab Hardware : miniSpartan6+

Target device is a Xilinx Spartan 6 - XC6SLX9 in a FBGA256 package.

Here's the full Schematic for the rev-B board.

Board pinout diargram:

Flashing is easiest done with xc3sprog

Once connected, you can use xc3sprog to configure the target device:
> xc3sprog –c ftdi output.bit

  • -c is the cable (in this case FTDI).
  • [the final parameter] is the .bit to be flashed to the device.